Assemblaggio dispositivi medicali

MACtac offre una gamma composta da vari  gradi di adesivi medicali progettati per il settore dei dispositivi medici in cui è possibile il  contatto con la pelle (adesivi performanti per l'accoppiamento  con polietilene). Vengono  utilizzati per la fabbricazione di componenti di monitoraggio, stimolazione e defibrillazione e sono adatti al contatto con la pelle

Riferimento	Descrizione	Adesivo	Liner	Spessore	Spessore dell'adesivo	Scheda tecnica
TM 6563	Double-sided foam coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive. TM-6563 was designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	semi bleached kraft release liner	0.8 mm	63.5µ
TM 9616	Double-sided foam tape coated on two sides with acrylic based, hypoallergenic pressure sensitive adhesive.designed for assembling medical devices where skin contact is possible. It exhibits good adhesion to polyethylene	SBMA	densified, semi-bleached kraft release liner	1.6 mm	63.5µ
TM 9942 NK	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive.formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads,IV holders	SBMA	polycoated white kraft release liner	0.8 mm	63.5 µ
TM 9946	Single-sided foam tape with acrylic based, hypoallergenic pressure sensitive adhesive. formulated for sustained contact with the human skin. Designed as a general purpose tape used for EKG pads, grounding pads, IV holders.	SBMA	polycoated white kraft release liner	1.6 mm	63.5µ
TM 9947	Cross linked polyethylene foam coated on one side with acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBA	white calendered release liner.	1 mm	50 µ
TM 9710	Double-sided film with acrylic based, hypoallergenic pressure sensitive adhesive. designed for assembling medical devices where skin contact is possible. The adhesive is very aggressive and bonds well to polyethylene	SBA	densified, semi bleached kraft release liner.	12.7µ	35.6µ
TM 6570	Single-sided film coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for mounting electro-medical devices to the human skin. Applications : electrocardiograph pads, grounding pads, etc ..	SBMA	densified, semi-bleached kraft release liner	90µ	63.5µ
TM 9478	Single-sided non woven tape coated with acrylic based, hypoallergenic pressure sensitive adhesive. Designed for use as a breathable medical tape : TENS and stress electrodes plus protective pads and covers	SBMA	densified, semi-bleached kraft release liner	68.5 gr/m²	355 µ – 455 µ
TM 8710	PET coated on two sides with a latex free, synthetic elastomer adhesive. The adhesive is protected by an 80 gr SCK release liner	synthetic elastomer adhesive	80 gr SCK with a silicone release coating on two sides.	12.7 µ	104 µ
TM 9976-60	Cross linked 1.6 mm polyethylene foam coated on one side with an acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr semi-bleached SCK paper release liner.	SBMA	80 gr semi-bleached SCK paper release liner	1.6 mm	1643 µ
TM 9979	Cross linked polyethylene foam coated on one side with 597acrylic based, hypoallergenic pressure sensitive adhesive. The adhesive is protected by a 80 gr white calendered release liner	SBMA	80 gr white calendered release liner.	1.5 mm	1550 µ